XJ-50 Dial Display Charpy and IZOD Combined Impact Tester
NO: Combination Impact Test Machine, Chapry + IZOD
Share With:
We"re here to help:
Easy ways to get the answers you need. Send E-mail WhatsAPP/Wechat
+86-15254140530
Easy ways to get the answers you need. Send E-mail WhatsAPP/Wechat
+86-15254140530
1. Simple Introduction
XJ-50 Dial Display Charpy and IZOD combined impact testing machine is mainly used in measuring impact toughness of non-metallic materials such as rigid plastics (including sheet, pipe, plastic profile), reinforced nylon, glass fiber reinforced plastic, ceramic, cast stone, and electrical insulation materials, etc. It is widely used in the chemical industry, scientific research units, colleges and universities quality inspection and other departments. It is an accurate and reliable impact testing machine with simple structure, easy and convenient to operate.
2. Working principle
The specimen clamped into horizontal beam is attacked by the pendulum with known energy, and destroyed by one time impact of the pendulum. The impact line is located in the center of the two supports. The energy difference of the pendulum hammer before and after impact is used to determine the energy absorbed by the specimen during failure. Then the impact strength is calculated according to the original cross-sectional area of the specimen.
3. Characteristics
1. Security guard
Automatically judge the state of the experiment to prevent mis-operation.
2. Convenient calibration system
The calibration of friction loss and pre-elevation angle can be carried out from time to time according to the requirement, which ensures the accuracy of the data.
3. Excellent quality
The instrument adopts high hardness and high precision bearing, which eliminates the loss caused by friction and ensures that the energy loss of friction is far less than the standard requirement.
4. Intelligent indication
According to the impact situation, it intelligently indicate the working condition, and interacts with the experimenter in real time, which guarantees the success rate of the experiment.
4. Test Standards
In accordance with standards of GB/T1043, GB/T2611, GB/T 3808, GB/T 18743 , JB/T 8762, ISO179, etc.
5. Main Technical Parameters
XJ-50 Dial Display Charpy and IZOD combined impact testing machine is mainly used in measuring impact toughness of non-metallic materials such as rigid plastics (including sheet, pipe, plastic profile), reinforced nylon, glass fiber reinforced plastic, ceramic, cast stone, and electrical insulation materials, etc. It is widely used in the chemical industry, scientific research units, colleges and universities quality inspection and other departments. It is an accurate and reliable impact testing machine with simple structure, easy and convenient to operate.
2. Working principle
The specimen clamped into horizontal beam is attacked by the pendulum with known energy, and destroyed by one time impact of the pendulum. The impact line is located in the center of the two supports. The energy difference of the pendulum hammer before and after impact is used to determine the energy absorbed by the specimen during failure. Then the impact strength is calculated according to the original cross-sectional area of the specimen.
3. Characteristics
1. Security guard
Automatically judge the state of the experiment to prevent mis-operation.
2. Convenient calibration system
The calibration of friction loss and pre-elevation angle can be carried out from time to time according to the requirement, which ensures the accuracy of the data.
3. Excellent quality
The instrument adopts high hardness and high precision bearing, which eliminates the loss caused by friction and ensures that the energy loss of friction is far less than the standard requirement.
4. Intelligent indication
According to the impact situation, it intelligently indicate the working condition, and interacts with the experimenter in real time, which guarantees the success rate of the experiment.
4. Test Standards
In accordance with standards of GB/T1043, GB/T2611, GB/T 3808, GB/T 18743 , JB/T 8762, ISO179, etc.
5. Main Technical Parameters
| Model | XJ-50 |
| Impact energy | Charpy: 0.5J, 1J, 2J, 4J, 5J, 7.5J, 15J, 25J, 50J(for customers to choose one) IZOD: 1J, 2.75J, 5.5J, 11J, 22J, (for customers to choose one) |
| Impact speed | Charpy: 2.9m/s, 3.8m/s; IZOD: 3.5m/s |
| Maximum friction loss energy | <0.5% |
| Pendulum preparing angle | 150±1° |
| Impact center distance | Charpy: 395mm; IZOD: 335mm |
| Power supply | 220VAC-15%～220VAC+10%，50Hz (single phase, three wire) |
Jinan Focus Test Instrument Co., Ltd.
Jinan City, Shandong Province, China 